PERMANENTLY MARK
MULTI-TOOLS

WITH NAMES, DESIGNS OR TRADEMARKS RIGHT IN YOUR OWN SHOP OR OFFICE IN SECONDS FOR LESS THAN ONE CENT PER MARK!

Now You Can Increase Your Sales And Add Extra Profit Easily By Adding Your Customer's Names, Designs Or Trademarks To Any Multi-Tool Or Knife You Sell Regardless Of Brand. And You Can Do It Very Easily!

Just Take A Moment And Check Out This Simple System Shown Below!

Here Are Examples Of Marks Made With The Etch-O-Matic That You Can Easily Do In Your Own Shop In Just Seconds! Now All You Do Is Create Your Own Design, Logo, Brand Name Or Trademark And Then Put It On Any Brand Of Multi-Tools For Less Than A Cent Per Mark.

It Is Easy, Quick, Inexpensive And Professional!

And Anyone In Your Shop Can Do It Easily!

 

 Trademark In Seconds

Quickly Mark Tools & Gauges

Deep Etch BLACK Mark

Black Mark On Knife

Black On 1/4" Drill Bit 

Deep Etch In 15 Sec.


NOW YOU CAN MARK MULTI-TOOLS, KNIVES
OR ANY METAL TOOL PERMANENTLY IN SECONDS!

         

REGULAR MARKING

 MARKING WITH A GROUND PLATE — Simply Lay the Tool or Part on the Ground Plate and Touch ETCH-O-MATIC to it for a Few Brief Seconds and Your Mark is Permanently Etched Into the Surface.

MARKS ROUND DRILL BITS

 MARKING ROUND SURFACES — Drill Bits, Milling Cutters, Tubing, Pipe or nearly anything Round can be Easily Marked by "Rolling"  the Mark on as Shown Above.

DEEP ETCH MARKING

 MAKES DEEP ETCH MARKS— ETCH-O- MATIC Marks many Metals as Deep as .003" with Deep Etch Adapter Clip; a Mark that can only be Removed by Grinding a Major Part of the Surface Away.

            If it is Metal
        ETCH-O-MATIC
    Can Mark It And Even
               Put Your
          TRADEMARK
    On It In Just Seconds!

 



ETCH-O-MATIC MARKS
ANY METAL TOOL... IN SECONDS!

ETCHES MARK INTO METAL — ETCH-O-MATIC will Etch into the surface of Anything made of Metal, including Tools, Instruments, Equipment or Manufactured Parts, anything that can be Typed, Written, Drawn or Photo Processed on a Special Stencil. This includes Names, Numbers, Designs, Logos, Trademarks or even Your Own Signature. Using an Electro- Chemical principle, the New ETCH-O-MATIC can Etch as Deep as .003" of an Inch in Less than 30 Seconds or Mark the Hardest Tool Steel and Carbides almost Instantly. It marks any Flat or Round Metal Surface down to 1/16" Diameter and any Metal Thickness from Thin Foil up to the Largest Castings easily. Most Marks (which look like Printing or Engraving) take about 3 to 20 Seconds (the Longer Dwell Times are for Deep Etching) and are Permanently Etched into the Tool or Manufactured Part.

VERY EASY TO USE!

ETCH-O-MATIC is FAST and EASY TO USE. Anyone in Your Company can become an EXPERT in JUST MINUTES and produce Professional Looking Marks Quickly. In Fact, Etch-O-Matic is by Far the Very Easiest Marking System to Learn that is Available Today!  Also, You will find that ETCH-O-MATIC is not only the Fastest way to make Permanent Marks on Anything Metal, but is by Far the LEAST EXPENSIVE method on the Market Today. Your Marks will Cost just Fractions of a Cent to Produce and You will be Extremely Pleased with the Result.

CHEAPER THAN LASER MARKS

Most Marks will Compare Favorably with Laser Marks on Metal and are Easier and Sometimes Even Faster to Make.  In Fact You have Seen Marks made by Etch-O-Matic hundreds of times before but probably did Not Realize it since the Marks are Used so often in Commerce Today.  If you have ever seen a Feeler Gauge, Drill Bit, Milling Cutter, Saw Blade, Knife Blade, Ball Bearing Race, Carbide Cutter or Thousands of other types of Metal Tools, Parts, Instruments or Equipment then You have probably seen Marks made by Etch-O-Matic.  In fact, we have Marks in a good Percentage of all of the Cars, Trucks, Commercial and Military Aircraft, Submarines, Hospital Surgical Instruments and Implant Devices and we even have Marks in the Nose Cone of the Space Shuttle.  (Yes, NASA called and said that they used an Etch-O-Matic to Mark an Inspection Date and Number in the Nose Cone of the Space Shuttles.)

BASICALLY, ETCH-O-MATIC and the Electro-Chemical Marking System has been Proven Over and Over again during our 36 Years in Business as the Best Way to Permanently Mark Leatherman Type Metal Tools.        

Using Dura-Film Stencils And 
The Etch-O-Matic Marking System
This Is The Quick, Easy And Inexpensive Way To Mark Your Tools, Parts Or Even A Knife.

First Make Your Artwork On Your Computer With Our New Ultra Violet Stencil Makers.  When Finished It Should Look Like This One. Or You Can Use Our Regular Die Impressed Stencils Which Are Included In Every Kit By Simply Typing On Them.

 Here We Are Showing Marking A Knife Blade But You Can Just As Easily Mark All Leatherman Type Multi-Tools The Same Way.

Place The Stencil On Your Tool, Part Or Knife Blade And Use A Small Piece Of Scotch Tape To Hold It In Position.  (Note: Use This Method When You Want "Perfect Placement of Your Mark".)

 

When Ready Wet The Head Of The Etch-O-Matic With Electrolyte And Place It On The Stencil.  After Everything Is Lined Up Correctly Just Touch The Blade With The Ground Wire (Shown With Alligator Clip) For A Few Seconds And Your Mark Is Complete.

 


Here Is Your Mark. It Is Black On Stainless Steel But You Can Also Make Deep Etch Marks Down To About .003" And They Can Be "Clear" Or Black.

 

Now You Can See Just How Easy It Is To Put Your Own Mark On Anything Metal Including Tools, Parts, Instruments Or Even Knives.

YOU CAN MARK ANY METAL TOOL THIS WAY.

Dealers, Now Increase Your Profit And Add Real Value 
To Your Knife And Multi-Tool Sales By Quickly Etching 
Names, Designs Or Trademarks On All Items You Sell!

Custom Marked Multi-Tools.

There Is No Faster Way To Increase Sales And Profit Margins
Then To Add A Professional Name Or Trademark To Your Tools!

Below Are Etch-O-Matic Metal Marking Kits Combined With The New STENCIL-MAKERS That Let You Permanently Mark Tools In Seconds!

 

Click Here To Go To Home Page

Etch-O-Matic Starter Kit - $79.95

Here is the Lowest Priced Kit on the Market Today But it Does the Job in Industry Everywhere Metal Marking is used.  The Marker Unit is 10 volts, 2 amps and is Excellent for Light Duty Marking of Tools and Parts. 
 

Kit Contents:

1 - Etch-O-Matic marker w/ head marking size 7/8" x 13/4"
1 - electrical cord
1 - ground plate
1 - 2 oz. Electrolyte solution in plastic bottle
1 - 10 pack of special stencils
1 - 4 oz. neutralizer
1 - deep etching adapter clip
1 - complete instructions

Each kit will make approximately 1000 marks before refill supplies are needed.

*** Unit is 110 Volts standard, but is available in ***
*** 220 volts for $20 more. ***

Etch-O-Matic Starter Kit - $79.95 - Order Now

Etch-O-Matic Super Kit - $229.95

The Super Etch-O-Matic is a Powerful, 15-Volt, 10-Amp, Heavy Duty, Industrial Quality Marking System that can Stand Up to Continuous Duty, Production Line Marking. It can make Fast AC Marks, then Change Instantly to Deep Etch Marking Down to .003" Deep. It can make Large Marks 2" x 4" or Larger (with optional purchase of  Medium or Large Grid Kits) for Trademarks or Etch Hard-to-Mark Coatings like Black Oxide Quickly. This is a Solid, "No Frills" Etcher that is Priced $200 to $300 BELOW Similar Kits on the Market Today.

BEST VALUE ON THE MARKET TODAY!

Kit Contents:

1 - 15 volt, 10 amp marker unit w/ external transformer
1 - adapter clip for deep etch marking
1 - electrical cord
1 - ground plate
1 - 8 oz. general purpose electrolyte in plastic bottle
1 - 8 oz. neutralizer solution in plastic bottle
1 - 100 pack of special stencils
1 - extra pads
1 - deep etching adapter clip
1 - sturdy plastic carrying case
1 - complete instructions

*** Unit is 110 Volts standard, but is available in ***
*** 220 volts for $20 more. ***

Etch-O-Matic Super Kit - $229.95 - Order Now

Etch-O-Matic Super Industrial Kit - $329.95

The Super Industrial Kit Combines the Best of Both of the TWO Kits Above and gives You enough Supplies to Mark Almost Any Type of Metal in the Average Plant. It also provides Great Value Because You get the Starter Kit 10-volt / 2-amp Unit Included FREE in the Kit.   Also Included is a Large 2" x 4" Grid that Allows You to Mark Much Larger Areas at the Same Time.

$400.00 VALUE — SAVE $120.00!

Kit Contents:

1 - Super Etch-O-Matic Unit
1 - Regular Etch-O-Matic Unit
 1 - adapter clip for deep etch marking
1 - electrical cord
1 - ground plate
1 - 8 oz. general purpose electrolyte in plastic bottle
1 - 8 oz. stainless steel electrolyte in plastic bottle
1 - 8 oz. neutralizer solution in plastic bottle
2 - 100 packs of special stencils
1 - 4 oz. aluminum electrolyte
1 - 4 oz. brass, copper, & bronze electrolyte
1 - 4 oz. black oxide electrolyte
1 - large 2" x 4" grid with stencils and pads to fit
2 - neutralizer power packs
1 - deep etching adapter clip
1 - extra grid
1 - sturdy plastic carrying case
1 - complete instructions

*** Unit is 110 Volts standard, but is available in ***
*** 220 volts for $20 more. ***

Super Industrial Kit - $329.95 - Order Now

UV Exposure Units
Includes everything you need to make your own custom Dura-Film stencils
for metal marking or glass etching.

 

Mark 440 Ultra Violet Exposure Unit
Allows You to Make Stencils Up to 4"x 4".
(NOTE: Makes Stencils Up to 5"x 6" Using Special Reflector Shield Kit Shown Below.)
Kit Contains:
 1 - 5"x 6"x 12" UV Exposure Unit W/ 120 Watt, 365 NM UV Bulb
1 - Exposure Tray W/ Glass Pressure Top
1 - 32 Oz. Bottle Stencil Developer
1 - Plastic Developing Tray
2 White Developing sponges
1 - Digital Timer
1 - 10 Pack of 4" x 4" Unexposed Dura-Film Stencils
2 - FREE Samples Of Dura-Film Stencils FOR PRACTICE
5 - Sheets of 8 1/2" x 11" Transparency Film
FREE Samples of Insta-Mark Labels for Trial
1 - Set Complete Instructions.

$169.95 - Order Now
 

Mark 560 Ultra Violet Exposure Unit
Allows You To Make Stencils Up to 5"x 6".
Kit Contains:
 1 - 5"x 6"x 12" UV Exposure Unit W/ 160 Watt Special UV Bulb
1 - Exposure Tray W/  Glass Top
1 - 32 oz. Bottle Stencil Developer
1 - 6"x 8" Developing & Curing Tray
2 - White Sponges
1 - Digital Timer
10 - 5" X 6" Unexposed Dura-Film Stencils
2 - Free Sample TEST Stencils FOR PRACTICE
5 - Sheets of 8 1/2" x 11" Transparency Film
 FREE Samples of Insta-Mark Labels for Trial
1 - Set Complete Instructions.

$229.95 - Order Now
 

Mark 680 Ultra Violet Exposure Unit
Allows You To Make Stencils Up to 6"x 8".
Kit Contains:
1 - 6"x 8"x 12" UV Exposure Unit W/ 160 Watt Special UV Bulb
1 - Aluminum Exposure Tray W/ Compression Foam And Glass Top
1 - 32 Oz. Bottle Stencil Developer
1 - Plastic Developing Tray
2 - White Developing sponges
1 - Digital Timer
1 - 5 Pack of 6" x 8" Unexposed Dura-Film Stencils
2 - FREE Samples Of Dura-Film Stencils FOR PRACTICE
5 - Sheets of 8 1/2" x 11" Transparency Film For Your Copy
FREE Samples of Insta-Mark Labels for Trial
1 - Set Complete Instructions.

$249.95 - Order Now
 

Mark 1000 Ultra Violet Exposure Unit
Allows you to make stencils up to 10" X 12".
Kit Contains:

1 - 10"x 12"x 12" UV Exposure Unit W/ 500 Watt Special UV Bulb
1 - Rubber Exposure Pad W/ Glass Pressure Top
1 - 32 Oz. Bottle Stencil Developer
1 - 12" x 15" Plastic Developing Tray
2 - White Developer Sponges
1 - Digital Timer
1 - 5 Pack of 10" x 12" Unexposed Dura-Film Stencils
2 - FREE Samples Of Dura-Film Stencils FOR PRACTICE
5 - Sheets of 8 1/2" x 11" Transparency Film For Your Copy
FREE Samples of Insta-Mark Labels for Trial
1 - Set Complete Instructions.

$299.95 - Order Now

UV Exposure Unit Combination Kits
Include everything you need to make your own custom Dura-Film stencils
and an Etch-O-Matic unit for marking metal.

 

Mark 440 Combination Kits
These Are Kits That Give You The Mark 440 U.V. Exposure Unit And Also
 Includes Either the Etch-O-Matic Starter Kit, Super Kit, or Super Industrial Kit.
 This Unit Makes Makes Stencils Up to 4"x 4".

Mark 440 Starter Kit Combo Deal
Contains everything found in the Standard Mark 440 Kit Plus an 
Etch-O-Matic Starter Kit.
Special Price Today - $229.95 Order Now

Mark 440 Super Combo Kit
Contains everything found in the Standard 440 Kit Plus an 
Etch-O-Matic Super Kit w/o plastic case. (Not Shown)
Special Price - $349.95 Order Now

Mark 440 Super Industrial Combo Kit
Contains everything found in the Standard Mark 440 Kit Plus an Etch-O-Matic Super Industrial Kit w/o plastic case. (Not Shown)Special Price - $399.95  Order Now

Mark 560 Combination Kit
These Are Kits That Give You The Mark 560 U.V. Exposure Unit And Also
Includes either the Etch-O-Matic Starter Kit, Super Kit, or Super Industrial Kit.
 Allows you to make Stencils up to 5"x 6".

Mark 560 Starter Combo Kit
Contains everything found in the Standard Mark 560 Kit Plus an Etch-O-Matic Starter Kit.
Special Price -  $269.95  Order Now

Mark 560 Super Combo Kit
Contains everything found in the Standard Mark 560 Kit Plus an Etch-O-Matic Super Kit w/o plastic case. (Not Shown)
Special Price Today - $399.95 Order Now

Mark 560 Super Industrial Combo Kit
Contains everything found in the Standard Mark 560 Kit Plus an Etch-O-Matic Super Industrial Kit w/o plastic case. (Not Shown)Special Price - $449.95  Order Now

Mark 680 Combination Kit
These Are Kits That Give You The Mark 680 U.V. Exposure Unit And Also
Includes either the Etch-O-Matic Starter Kit, Super Kit, or Super Industrial Kit.
Allows You To Make Stencils Up to 6"x 8".

Mark 680 Starter Combo Kit
Contains everything found in the Standard Mark 680 Kit Plus an Etch-O-Matic Starter Kit.
Special Price - $299.95 - Order Now

Mark 680 Super Combo Kit
Contains everything found in the Standard Mark 680 Kit Plus an Etch-O-Matic Super Kit w/o plastic case. (Not Shown)
Special Price - $399.95 Order Now

680 Super Industrial Combo Kit
Contains everything found in the Standard Mark 680 Kit Plus an Etch-O-Matic Super Industrial Kit w/o plastic case. (Not Shown)Special Price - $499.95Order Now

Mark 1000 Combination Kit
These Are Kits That Give You The Mark 1000 U.V. Exposure Unit And Also
Includes either the Etch-O-Matic Starter Kit, Super Kit, or Super Industrial Kit.
Allows You To Make Stencils Up to 10"x 12".

Mark 1000 Starter Combo Kit
Contains everything found in the Standard Mark 1000 Kit Plus an Etch-O-Matic Starter Kit. 
Special Price Today -  $349.95 Order Now

Mark 1000 Super Combo Kit
Contains everything found in the Standard Mark 1000 Kit Plus an Etch-O-Matic Super Kit w/o plastic case. (Not Shown)
Special Price - $449.95 Order Now

Mark 1000 Super Industrial Combo Kit
Contains everything found in the Standard Mark 1000 Kit Plus an Etch-O-Matic Super Industrial Kit w/o plastic case. (Not Shown)Special Price - $529.95 Order Now

To Contact Us Just Call: 800-775-0797 During Pacific Coast
 Time From 8:00 A.M. To 4:30 P.M. And A Real Person Will Talk With You
And Explain Anything You Want To Know. 
Email Us Or FAX At 1-360-985-2996
Leatherman Tool Marker - Martronics Corporation
 P.O. Box 200 / 500 Wilcox Road
Salkum, WA 98582
Email - Click Here
Phone: 1.800.775.0797
Fax: 1.360.985.2996